from 01.01.2009 to 01.01.2014
Barnaul, Barkaul, Russian Federation
Barnaul, Barkaul, Russian Federation
Barnaul, Barkaul, Russian Federation
To restore the impaired or lost functions of the dental system, the dentist often resorts to the manufacture of dentures and devices. To achieve high quality of such structures, it is necessary to obtain a precision impression. The precision of the impression is its striving for maximum dimensional accuracy. The article presents the characteristics of impressions and impression masses that affect the accuracy of future orthopedic structures. A poor-quality impression can lead to errors in the manufacture of orthopedic structures and the development of the following complications: caries (cervical or under the crown), diseases of the marginal periodontal, pulpitis or pulp necrosis with subsequent periodontitis, cracks, chips of the lining; premature violation of the fixation of the structure. To reduce the risks of complications, new technologies for obtaining impressions are being introduced into the clinical reception of orthopedic dentists, to increase the quality of finished structures. There are a large number of methods for obtaining refined prints, each of which has its advantages and disadvantages. This diversity can be explained by the modernization of the group of elastic impression materials and the appearance of masses of different viscosity. The development of methods for obtaining impressions is currently an urgent area of dentistry. In addition to traditional types of impressions, digital technologies, namely optical impression, are increasingly being introduced into dental practice. The result of which is a three-dimensional (3D) model of the prepared teeth, for the manufacture of indirect restorations of teeth using CAD/CAM systems. The article describes various modern methods of obtaining precision prints in dentistry. The comparative characteristics of laboratory and clinical scanners for obtaining optical impressions are given.
dentistry, impression, impression material, sulcus, precision
1. Abesadze L.K. 3D-vizualizaciya lica i zubnyh ryadov. Central'nyy nauchnyy vestnik. 2017;2(16):3-4. [L.K. Abesadze. 3D-visualization of the face and dentition. Central Scientific Bulletin. 2017;2(16):3-4. (In Russ.)]. https://www.elibrary.ru/item.asp?id=29906377
2. Arvin M.M. Tehnologii sozdaniya cifrovyh ottiskov pri izgotovlenii zubnyh protezov. International Journal of Medicine and Psychology. 2018;1(2):4-7. [M.M. Arvin. Technologies for creating digital impressions in the manufacture of dental prostheses. International Journal of Medicine and Psychology. 2018;1(2):4-7. (In Russ.)]. https://www.elibrary.ru/item.asp?id=37023762
3. Vel'makina I.V., Zhulev E.N., Bogomolova Yu.B. Sravnitel'naya ocenka razmernoy tochnosti cifrovyh modeley chelyustey, izgotovlennyh po tehnologii stereolitografii. Sovremennye problemy nauki i obrazovaniya. 2018;3:55-55. [I.V. Velmakina, E.N. Zhulev, Yu.B. Bogomolova. Comparative evaluation of the dimensional accuracy of digital jaw models manufactured using stereolithography technology. Modern problems of science and education. 2018;3:55-55. (In Russ.)]. https://www.elibrary.ru/item.asp?id=35166868
4. Garaev M.M., Hakimov A.Z., Yarulina Z.I. Sravnenie cad/cam skanerov. Aktual'nye voprosy stomatologii. 2021:543-552. [M.M. Garaev, A.Z. Khakimov, Z.I. Yarulina. Somparison of cad/cam scanners. Topical issues of dentistry. 2021:543-552. (In Russ.)]. https://www.elibrary.ru/item.asp?id=44856671
5. Gafforov S.A. Abdirimov I.S., Sabirov B.Yu. Analiz prichin neblagopriyatnyh ishodov protezirovaniya metallokeramicheskimi konstrukciyami. Stomatologiya. 2018;2:50-52. [S.A. Gafforov, I.S. Abdirimov, B.Yu. Sabirov. Analysis of the causes of adverse outcomes of prosthetics with metal-ceramic structures. Stomatologiya. 2018;2:50-52. (In Russ.)]. https://www.elibrary.ru/item.asp?id=37055973
6. Dayneko E.E., Sarafanova A.B. Ocenka kachestva ottiskov, postupayuschih v zubotehnicheskie laboratorii. Aktual'nye problemy stomatologii detskogo vozrasta i ortodontii : sbornik nauchnyh statey IX regional'noy nauchno-prakticheskoy konferencii s mezhdunarodnym uchastiem po detskoy stomatologii. Habarovsk. 08 noyabrya 2019 goda. Habarovsk : Dal'nevostochnyy gosudarstvennyy medicinskiy universitet. 2019:43-46. [E.E. Daineko, A.B. Sarafanova. Assessment of the quality of prints entering dental laboratories / // Actual problems of pediatric dentistry and orthodontics : collection of scientific articles of the IX Regional Scientific and Practical conference with international participation on pediatric dentistry. Khabarovsk. November 08, 2019. Khabarovsk : Far Eastern State Medical University. 2019:43-46. (In Russ.)]. https://www.elibrary.ru/item.asp?id=42437177
7. Dryga A.N., Latysheva M.D., Shihancov A.V. Teoriya preimuschestva odnoetapnogo metoda snyatiya silikonovyh ottiskov pered dvuhetapnym. Nauchnyy vestnik Kryma. 2019;1(19):17. [A.N. Dryga, M.D. Latysheva, A.V. Shikhantsov. The theory of the advantages of a one-stage method of removing silicone impressions before a two-stage one. Scientific Bulletin of the Crimea. 2019;1(19):17. (In Russ.)]. https://www.elibrary.ru/item.asp?id=37845140
8. Zhulev E.N., Vokulova Yu.A. Sravnitel'naya ocenka razmernoy tochnosti karkasov iskusstvennyh koronok, izgotovlennyh s pomosch'yu tradicionnyh i cifrovyh tehnologiy. Norwegian Journal of Development of the International Science. 2020;39-2:12-16. [E.N. Zhulev, Yu.A. Akulova. Comparative assessment of the dimensional accuracy of artificial crown frames made using traditional and digital technologies. Journal of Norwegian Development of International Science. 2020;39-2:12-16. (In Russ.)]. https://www.elibrary.ru/item.asp?id=42423986
9. Zhulev E.N., Vokulova Yu.A. Sravnitel'naya ocenka razmernoy tochnosti ottiskov v eksperimente. Dental Forum. 2017;1:38-42. [E.N. Zhulev, Yu.A. Vokulova. Comparative assessment of the dimensional accuracy of impressions in the experiment. Dental Forum. 2017;1:38-42. (In Russ.)]. https://www.elibrary.ru/item.asp?id=29824004
10. Zhulev E.N., Teterin A.I. Sravnitel'naya ocenka tochnosti ottiskov dlya ortopedicheskogo lecheniya defektov tverdyh tkaney zubov iskusstvennymi koronkami. Sovremennye problemy nauki i obrazovaniya. 2015;3:127. [E.N. Zhulev, A.I. Teterin. Comparative evaluation of the accuracy of impressions for orthopedic treatment of defects of hard tissues of teeth with artificial crowns. Modern problems of science and education. 2015;3:127. (In Russ.)]. https://www.elibrary.ru/item.asp?id=23703555
11. Ivanov A.A., Ganisik A.V. Prichiny oshibok pri poluchenii ottiskov elasticheskimi materialami i puti ih preduprezhdeniya. Scientist. 2021;2(16):6. [A.A. Ivanov, A.V. Ganisik. The causes of errors in obtaining impressions with elastic materials and ways to prevent them. Scientist. 2021;2(16):6. (In Russ.)]. https://www.elibrary.ru/item.asp?id=47378318
12. Il'kevich O.P. Ispol'zovanie polietilenovoy plenki v snyatii dvuhsloynogo dvuhetapnogo ottiska. 2019. [O.P. Ilkevich. The use of polyethylene film in the removal of a two-layer two-stage impression. 2019. (In Russ.)]. http://rep.bsmu.by/handle/BSMU/21848
13. Ryahovskiy A.N., Kostyukova V.V. Sravnitel'noe issledovanie razmernoy tochnosti otobrazheniya kul'ti zuba i polnoy zubnoy dugi, poluchennogo s pomosch'yu skanirovaniya na razlichnyh intraoral'nyh i laboratornyh skanerah. Stomatologiya. 2016;95(4):65-70. [A.N. Ryakhovsky, V.V. Kostyukova. Comparative study of the dimensional accuracy of the display of the tooth stump and the full dental arch obtained by scanning on various intraoral and laboratory scanners. Stomatologiya. 2016;95(4):65-70. (In Russ.)]. https://www.elibrary.ru/item.asp?id=26603275
14. Muradov M.A. Sravnitel'nyy analiz razlichnyh vidov precizionnyh ottiskov : dis. … kand. med. nauk. Central'nyy nauchno-issledovatel'skiy institut stomatologii. 2004. [M.A. Muradov. Comparative analysis of various types of precision prints : dis. … cand. med. sciences. Central Research Institute of Dentistry. 2004. (In Russ.)]. https://www.elibrary.ru/item.asp?id=16170364
15. Mannapov E.R., Viktorov S.V. Primeneniya ottisknyh materialov v ortopedicheskoy stomatologii. Materialy XXIV Mezhdunarodnogo yubileynogo simpoziuma" Innovacionnye tehnologii v stomatologii", posvyaschennogo 60-letiyu stomatologicheskogo fakul'teta Omskogo gosudarstvennogo medicinskogo universiteta. 2017:264-272. [E.R. Mannapov, S.V. Viktorov. Applications of impression materials in orthopedic dentistry. Materials of the XXIV International Anniversary Symposium "Innovative Technologies in Dentistry" dedicated to the 60th anniversary of the Faculty of Dentistry of Omsk State Medical University. 2017:264-272. (In Russ.)]. https://www.elibrary.ru/item.asp?id=32365205
16. Oreshaka O.V., Ganisik A.V., Kruchihina Yu.Yu. Al'ternativnaya metodika polucheniya dvuhsloynogo ottiska pri nes'emnom zubnom protezirovanii. Global'nye problemy sovremennosti. 2020;1(10-12):63-69. [O.V. Oreshaka, A.V. Ganisik, Yu.Yu. Kruchikhina. Alternative technique for obtaining a two-layer impression with non-removable dental prosthetics. Global problems of our time. 2020;1(10-12):63-69. (In Russ.)]. https://www.elibrary.ru/item.asp?id=44337145
17. Poloneychik N.M. Metody polucheniya ottiskov. Sovremennaya stomatologiya. 2015;1(60):20-31. [N.M. Poloneychik. Methods of obtaining prints. Modern dentistry. 2015;1(60):20-31. (In Russ.)]. https://www.elibrary.ru/item.asp?id=23137264
18. Ryahovskiy A.N., Karapetyan A.A., Avakov G.S. Vozmozhnosti razlichnyh CAD/SAM-sistem po tochnosti skanirovaniya i izgotovleniya karkasov nes'emnyh zubnyh protezov. Klinicheskaya stomatologiya. 2010;3:12-17. [A.N. Ryakhovsky, A.A. Karapetyan, G.S. Avakov. Possibilities of various CAD/CAM systems in terms of scanning accuracy and fabrication of frames for fixed dentures. Clinical Dentistry. 2010;3:12-17. (In Russ.)]. https://www.elibrary.ru/item.asp?id=22653423
19. Mackevich A.A., Stefankova R.K., Ursulenko N.V. Metody polucheniya vysokotochnyh ottiskov na ortopedicheskom prieme (obzor literatury). Aktual'nye problemy sovremennoy nauki. 2017;4:271-273. [A.A. Matskevich, R.K. Stefankova, N.V. Ursulenko. Methods of obtaining high-precision impressions at orthopedic reception (literature review). Actual problems of modern science. 2017;4:271-273. (In Russ.)]. https://www.elibrary.ru/item.asp?id=32276346
20. Vokulova Yu.A. Razrabotka i vnedrenie cifrovyh tehnologiy pri ortopedicheskom lechenii s primeneniem nes'emnyh protezov zubov : dis. … kand. med. Nauk. 2017:22. [Yu.A. Vokulova. Development and implementation of digital technologies in orthopedic treatment with the use of fixed dentures : dis. … cand. med. Sciences. 2017:22. (In Russ.)]. https://www.elibrary.ru/item.asp?id=30440885
21. Yazdanie N. et al. Comparison of Linear Dimensional Accuracy Between One Step and Two-step Impression Technique Using Polyvinyl Siloxane Impression Material // Journal of Gandhara Medical and Dental Science. - 2022;9(3):68-74. https://doi.org/10.37762/jgmds.9-3.134
22. Nissan J. et al. Influence of Vinyl Polysiloxane Impression Techniques on Marginal Fit of Metal Frameworks for Fixed Partial Dentures // Materials. - 2020;13(20):4684. doi:https://doi.org/10.3390/ma13204684.
23. Hafezeqoran A. et al. Comparing the Dimensional Accuracy of Casts Obtained from Two Types of Silicone Impression Materials in Different Impression Techniques and Frequent Times of Cast Preparation // International Journal of Dentistry. - 2021;2021. doi:https://doi.org/10.1155/2021/9977478.
24. Zelikman H. et al. Effect of Mixing and Impression Techniques Using Vinyl Polysiloxane (VPS) on the Accuracy of Fixed Partial Dentures // Applied Sciences. - 2021;11(17):7845. DOIhttps://doi.org/10.3390/app11177845
25. Yaqoob A. et al. Ranorama of impression techniques in fixed partial dentures. a systematic review // International Journal of Medical Dentistry. - 2018;22(1). https://www.researchgate.net/publication/329268013_PANORAMA_OF_IMPRESSION_TECHNIQUES_IN_FIXED_PARTIAL_DENTURES_A_SYSTEMATIC_REVIEW
26. Yu H. Digital Impression Technology // Digital Guided Micro Prosthodontics. - 2022:105-123. https://doi.org/10.1007/978-981-19-0256-7_8
27. Mahagaonkar P.A. et al. Evaluation of Dimensional Accuracy of Three Combinations of Polyvinyl Siloxane Impression Material: An In Vitro Study // The Journal of Contemporary Dental Practice. - 2020;21(2):190-196. https://pubmed.ncbi.nlm.nih.gov/32381826/
28. Nulty A.B. A comparison of full arch trueness and precision of nine intra-oral digital scanners and four lab digital scanners // Dentistry Journal. - 2021;9(7):75. doi:https://doi.org/10.3390/dj9070075.
29. Alhallak K., Nankali A., Hagi-Pavli E. A review on clinical use of CAD/CAM and 3D printed dentures in dental practices. 2022. : https://doi.org/10.21203/rs.3.rs-1801353/v1
30. Reich S., Yatmaz B., Raith S. Do “cut out-rescan” procedures have an impact on the accuracy of intraoral digital scans? // The Journal of Prosthetic Dentistry. - 2021;125(1):89-94. doi:https://doi.org/10.1016/j.prosdent.2019.11.018.
31. Gurel K. et al. In vitro marginal and internal adaptation of metal-ceramic crowns with cobalt-chrome and titanium framework fabricated with CAD/CAM and casting technique // Nigerian Journal of Clinical Practice. - 2019;22(6):812-812. doi:https://doi.org/10.4103/njcp.njcp_570_18.
32. Kumar A., Thakur R., Sharma P. Anatomization of Impression Techniques in Fixed Prosthodontics-A Review // Journal of Advanced Medical and Dental Sciences Research. - 2021;9(3):139-147. https://jamdsr.com/uploadfiles/30vol9issue3pp139-147.20210327093044.pdf
33. Raghav P.S. et al. Impression Techniques for Tooth-Supported Fixed Partial Denture // International Journal Of Drug Research And Dental Science. - 2022;4(2):38-48. https://doi.org/10.36437/ijdrd.2022.4.2.G
34. JhanJi R. et al. Accuracy of Elastomeric Impression Made with Standard and Dual Arch Tray: An In-vitro Study // Journal of Clinical & Diagnostic Research. - 2022;16(5). doi:https://doi.org/10.4103/0972-4052.176527.
