from 01.01.2017 to 01.01.2019
Ekaterinburg, Ekaterinburg, Russian Federation
employee
Ekaterinburg, Ekaterinburg, Russian Federation
Introduction. Modern implant systems have different types of connections between the implant and the abutment, in the area of which a microgap can be constructively formed, as a result of which dentists are faced with a loss of bone tissue and inflammatory processes in the area of dental implants. Objectives ― assessment of the accuracy of the marginal fit of an individual abutment to the implant platform on a sagittal slice. Methods. Two groups were formed according to the type of connection between the implant and the abutment (conical and planar). Individual abutments for all systems were made using CAD-CAM technology. Using the grinding machine Metaserv 25, sagittal sections of the abutment and implant were obtained. The study and cutting the compound was carried out on a TESCAN MIRA 3 autoemission electron microscope. Results. Using an electron microscope TESCAN MIRA 3, we obtained images of the surface of the connection of the abutment and the implant on a sagittal slice. When three-dimensional scanning of the studied samples were obtained volumetric images. Measurements of the microgap of the implant compound and abutment on the sagittal split showed that with an increase of x8000 in the first group with a conical connection, the figure varied from 0.27-3.46 microns. In the second group with a planar compound, the index varied from 6.50-9.70 microns. Conclusions. The ratio of the abutment to the implant with conical connections showed the best results in comparison with planar connections. Using CAD-CAM technology allows you to create prostheses with good marginal fit of the connection between the implant and the abutment.
implant, abutment, accuracy of abutment fit to the implant, sagittal slice, peri-implantitis, microsensor
1. Avakov, G. S. (2012). Sravnitel'noye issledovaniye razlichnykh CAD/CAM-sistem dlya izgotovleniya karkasov nes"yemnykh zubnykh protezov protezami : avtoref. diss... kand. med. nauk [A comparative study of various CAD / CAM systems for the manufacture of frames of non-removable dentures with prostheses: author. diss ... cand. med. of science]. Moscow, 19. (In Russ.)
2. Andreyeva, S. N., Shestakov, V. T., Klimashin, YU. I. (2003). Kriterii i pokazateli otsenok v ortopedicheskoy stomatologii [Criteria and indicators of assessments in orthopedic dentistry]. Moscow, 205. (In Russ.)
3. Smith, B., Howe, L. ed. E. Yu. Novikov (2010). Koronki i mostovidnyye protezy v ortopedicheskoy stomatologii [Crowns and bridges in prosthetic dentistry]. Moscow : MEDpress-Inform, 344. (In Russ.)
4. Virts, Y. A., Shmidli, F. (1999). Okisnaya plenka i pripoi kak prichiny otdalennykh neudach implantatsii [Oxide film and solders as the causes of distant implantation failures]. Kvintessentsiya [Quintessence], 5/6, 41-49. (In Russ.)
5. Gromova, YU. I. (2012). Faktory negativnogo vliyaniya na gigiyenu polosti rta u lits s dental'nymi implantatami : avtoref. diss... kand. med. nauk [Factors of negative impact on oral hygiene in individuals with dental implants : authors. diss ... cand. med. science]. Moscow, 22. (In Russ.)
6. Dolgalev, A. A. (2009). Obosnovaniye differentsirovannogo primeneniya implantatsionnykh materialov v stomatologii : avtoref... dis. dokt. med. nauk [Justification of the differentiated use of implant materials in dentistry : authors. dis. dr. med. science]. Moscow, 30. (In Russ.)
7. Dzhovan'oli, Zh.-L., Renvert, S. (2014). Periimplnatit [Periimplnatite]. Moscow : ABC, 255.
8. Zhulev, E. H. (2000). Materialovedeniye v ortopedicheskoy stomatologii [Materials science in prosthetic dentistry]. Nizhny Novgorod, 135. (In Russ.)
9. Zhusev, A. I., Remov, A. YU. (2004). Dental'naya implantatsiya. Kriterii uspekha [Dental implantation. Criteria of success]. Center of dental implantation, 224. (In Russ.)
10. Zagorsky, V. A., Robustova, T. G. (2011). Protezirovaniye zubov na implantatakh [Prosthetics of teeth on implants]. Moscow, 351. (In Russ.)
11. Block, M. S., ed. Lomakina, M. V. (2011). Dental'naya implantologiya: khirurgicheskiye aspekty [Dental implantology: surgical aspects]. Moscow : MEDpress-inform, 448. (In Russ.)
12. Olesova, V. N., Rogatnev, V. P., Silaev, E. V., Pozdeev, A. I., Zhuruli, G. N., Kuznetsov, A. B., Magamedkhanov, Yu. M. (2008). CAD/CAM tekhnologii izgotovleniya keramicheskikh protezov kak perspektivnoye napravleniye prakticheskoy ortopedicheskoy stomatologii i implantologii [CAD / CAM technology for the manufacture of ceramic prostheses as a promising direction of practical orthopedic dentistry and implantology]. Maestro stomatologii [Maestro Dentistry], 3, 25-28. (In Russ.)
13. Paraskevich, V. L. (2011). Dental'naya implantologiya: Osnovy teorii i praktiki [Dental implantology: Fundamentals of Theory and Practice]. Moscow : Medical Information Agency, 3, 400. (In Russ.)
14. Renoir, F., Rangert, B. (2004). Faktory riska v stomatologicheskoy implantologii. Optimizirovannyy klinicheskiy analiz s tsel'yu povysheniya effektivnosti lecheniya [Risk factors in dental implantology. Optimized clinical analysis with the aim of increasing the effectiveness of treatment]. Moscow : ABC, 182. (In Russ.)
15. Goh, J. C., Ho, N. C., Bose, K. (1990). Principles and applications of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) technology in orthopaedics. Ann Acad Med Singapore, 19 (5), 706-713.
16. Kurbad, A. (2005). CAD/CAM-manufactured restorations made of lithiumdisilicate glass ceramics. Int J Comput Dent, 8 (4), 337-348.
17. Lehmann, K. M., Kämmerer, P. W., Wagner, W., Weyhrauch, M., Scheller, H. (2012). Biologische Breite an Implantaten und Platform-Switching. DENT IMPLANTOL, 16, 7, 504-507.
18. Miyazaki, D. T., Hotta, Y., Kunii, J., Kuriyama, S., Tamaki, Y. (2009). A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dental materials Journal, 28, 1, 44-56.
19. Renouard, F., Rangert, B. (2004). Risk factors in implant dentistry. Quintessence Publishing Co, Inc, 182.
20. (2009). RMS Foundation. Mikrospaltuntersuchung an ICX-templant Implantaten.
21. Tinschert, J., Natt, G., Mautsch, W. et al. (2001). Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper. Dent, 26, 4, 367-374.
22. Tinschert, J., Natt, G., Hassenpflug, S., Spiekermann, H. (2004). Status of current CAD/CAM technology in dental medicine. Int. J. Comput. Dent, 7 (1), 25-45.
23. Weinberg, L. (2003). Atlas of tooth- and implant- supported prosthodontics. Quintessence Publishing Co, Inc, 223.
24. Werner, H., Mormann, W. H., Tinshert, J. (2006). State of the Art of CAD/CAM Restorations. 20 years of CEREC CAD/CAM Systems and Materials. Dental Lab, 3, 139-144.
25. Witkowski, S. (2005). CAD/CAM in dental technology. Quintessence Dent. Technol, 28, 169-184.
