employee
Rostov-on-Don, Rostov-on-Don, Russian Federation
Stavropol, Stavropol, Russian Federation
Stavropol, Stavropol, Russian Federation
Krasnodar, Krasnodar, Russian Federation
employee
Stavropol, Stavropol, Russian Federation
Vladikavkaz, Vladikavkaz, Russian Federation
employee
Stavropol, Stavropol, Russian Federation
Stavropol, Stavropol, Russian Federation
UDC 616.31
In recent years, additive manufacturing has taken an increasingly significant place in modern orthodontics, enabling a transition from the use of individual digital tools to an integrated clinical and laboratory workflow that includes diagnosis, virtual planning, appliance fabrication, and treatment outcome monitoring. This review examines the current capabilities of intraoral scanning, cone-beam computed tomography, three-dimensional cephalometry, artificial intelligence, CAD/CAM technologies, and 3D printing at the stages of diagnosis, planning, and clinical implementation of orthodontic treatment. It is shown that the integration of digital methods improves the accuracy of morphometric analysis, enhances the assessment of anatomical and functional parameters, and increases the reproducibility of clinical and laboratory steps. Special attention is paid to the use of additive technologies in the manufacture of aligners, retainers, custom-made cortical-supported appliances, and devices used in combined surgical-orthodontic treatment. Separate sections address digital assessment of occlusion, the temporomandibular joint, bone boundaries for orthodontic tooth movement, and artificial intelligence capabilities in image analysis automation and clinical decision support. Material science aspects of 3D printing are analyzed, including the properties of polymeric and metallic materials, post-processing parameters, and clinical limitations. It is emphasized that the key trend is the shift towards a continuous digital cycle; however, for 3D‑printed devices, biocompatibility, wear resistance, and long-term stability remain insufficiently studied. Further development of additive technologies in orthodontics is determined not only by expanding technological possibilities but also by the need to accumulate clinically verified data on accuracy, biocompatibility, long-term stability, and effectiveness of manufactured appliances.
orthodontics, additive technologies, 3D-printing, CAD/CAM, intraoral scanning, artificial intelligence
1. Afasizheva A.A., Afasizhev T.M., Didanova A.H. Retrospektivnyy klinicheskiy analiz effektivnosti rasshireniya zubnyh dug prozrachnymi elaynerami u pacientov detskogo vozrasta so smeshannym prikusom. Medicus. 2025;(7):48-51. [Afasizheva A.A., Afasizhev T.M., Didanova A.H. A retrospective clinical analysis of the effectiveness of dental arch expansion with transparent aligners in children with mixed bite. Medicus. 2025;(7):48-51. (In Russ.)]. https://www.elibrary.ru/item.asp?id=82632044
2. Apresyan S.V., Stepanov A.G., Deev M.S., Gadzhiev M.A., Borodina I.D. Issledovanie poverhnosti obrazcov konstrukcionnyh materialov dlya izgotovleniya okklyuzionnyh shin s pomosch'yu CAD/CAM tehnologiy. Institut stomatologii. 2022;(3):93-95. [Apresyan S.V., Stepanov A.G., Deev M.S., Gadzhiev M.A., Borodina I.D. examination of the surface of samples of structural materials for the manufacture of occlusal tires using CAD/CAM technologies. The Dental Institute. 2022;(3):93-95. (In Russ.)]. https://www.elibrary.ru/item.asp?id=49483819
3. Apresyan S.V., Stepanov A.G., Moskovec O.O., Malieva E.A. Cifrovoe planirovanie ortodonticheskogo lecheniya: literaturnyy obzor. Rossiyskiy stomatologicheskiy zhurnal. 2024;28(6):601-611. [Apresyan S.V., Stepanov A.G., Moskovec O.O., Malieva E.A. Digital planning of orthodontic dental treatment: a literature review. Russian Journal of Dentistry. 2024;28(6):601-611. (In Russ.)]. https://doi.org/10.17816/dent634964
4. Ayupova I.O., Mahota A.Yu., Kolsanov A.V., Popov N.V., Davidyuk M.A., Nekrasov I.A. i dr. Vozmozhnosti metodov cefalometricheskogo analiza rentgenologicheskih izobrazheniy v trehmernom prostranstve (obzor). Sovremennye tehnologii v medicine. 2024;16(3):62-75. [Ayupova I.O., Makhota A.Yu., Kolsanov A.V., Popov N.V., Davidyuk M.A., Nekrasov I.A. et al. Capabilities of cephalometric methods to study x-rays in three-dimensional space (review). Sovremennye tehnologii v medicine 2024;16(3):62-75. (In Russ.)]. https://doi.org/10.17691/stm2024.16.3.07
5. Borodina I.D., Grigor'yanc L.S., Gadzhiev M.A., Apresyan S.S., Batov R.V., Stepanov A.G. i dr. Sravnitel'naya ocenka tochnosti otobrazheniya zubnoy dugi pri pomoschi sovremennyh intraoral'nyh 3D-skanerov. Rossiyskiy stomatologicheskiy zhurnal. 2022;26(4):287-297. [Borodina I.D., Grigoryants L.S., Gadzhiev M.A., Apresyan S.S., Batov R.V., Stepanov A.G. et al. Comparative evaluation of the accuracy of the dental arch display using modern intraoral three-dimensional scanners. Russian Journal of Dentistry. 2022;26(4):287-297. (In Russ.)]. https://doi.org/10.17816/1728-2802-2022-26-4-287-297
6. Vakushina E.A., Grigorenko M.P., Grigorenko P.A., Bragin G.E. Cifrovaya ocenka osobennostey topografii elementov visochno-nizhnechelyustnogo sustava u vzroslyh pacientov s distal'noy okklyuziey i celostnymi asimmetrichnymi zubnymi dugami, realizovannaya v programme «OnDemand3D Dental». Ortodontiya. 2025;(2):58. [Vakushina E.A., Grigorenko M.P., Grigorenko P.A., Bragin G.E. Digital assessment of topographic features of temporomandibular joint elements in adult patients with distal occlusion and intact asymmetric dental arches performed in the OnDemand3D Dental software. Orthodontia. 2025;(2):58. (In Russ.)]. https://www.elibrary.ru/item.asp?id=89112964
7. Grigorenko M.P., Bragin E.A., Vakushina E.A. 3D-cifrovye metody issledovaniya v ortopedicheskoy stomatologii i ortodontii: uchebnoe posobie dlya studentov medicinskih vuzov. Stavropol': Izd-vo StGMU; 2024. 91 s. [Grigorenko M.P., Bragin E.A., Vakushina E.A. 3D digital research methods in prosthodontics and orthodontics: textbook for medical students. Stavropol: Publishing house of Stavropol State Medical University; 2024. 91 p. (In Russ.)].
8. Grigorenko M.P., Grigorenko P.A., Vakushina E.A., Sharipov R.E. Razrabotka original'nogo s'emnogo armirovannogo reteynera, realizovannogo s primeneniem CAD/CAM-tehnologiy i fotopolimernoy 3D-pechati. Molodezhnyy innovacionnyy vestnik. 2025;14(S1):757-760. [Grigorenko M.P., Grigorenko P.A., Vakushina E.A., Sharipov R.E. Development of an original removable reinforced retainer, manufactured using CAD/CAM-technologies and photopolymer 3D-printing. Molodežnyj innovacionnyj vestnik. 2025;14(S1):757-760. (In Russ.)]. https://www.elibrary.ru/item.asp?id=82825371
9. Grigorenko M.P., Vakushina E.A., Bragin E.A., Lapina N.V., Grigorenko P.A., Mrikaeva M.R. i dr., avtory; OOO "Ortodonticheskaya praktika professora Vakushinoy", patentoobladatel'. S'emnyy ortopedicheskiy razobschayuschiy centriruyuschiy protez. Rossiyskaya Federaciya patent na poleznuyu model' RF 231269. Opubl. 21.01.2025. [Grigorenko M.P., Vakushina E.A., Bragin E.A., Lapina N.V., Grigorenko P.A., Mrikaeva M.R. et al., inventors; Professor Vakushina's Orthodontic Practice, LLC, assignee. Removable orthopedic disengaging centering prosthesis. Russian Federation patent RU 231269. Published 21.01.2025. (In Russ.)]. https://www.elibrary.ru/item.asp?id=80279898
10. Grigorenko P.A., Grigorenko M.P., Vakushina E.A., Bragin G.E. Virtual'noe izuchenie personalizirovannyh 3D-pokazateley okklyuzionnyh kontaktov i biometrii u pacientov s distal'noy okklyuziey, provedennoe razlichnymi cifrovymi metodami. Ortodontiya. 2025;(2):59. [Grigorenko P.A., Grigorenko M.P., Vakushina E.A., Bragin G.E. Virtual study of personalized 3D indicators of occlusal contacts and biometrics in patients with distal occlusion performed using various digital methods. Orthodontia. 2025;(2):59. (In Russ.)]. https://www.elibrary.ru/item.asp?id=89112965
11. Danilova M.A., Dmitrienko I.V., Arutyunyan L.I. Izuchenie sostoyaniya kostnoy tkani s pomosch'yu 3D-cefalometrii pri ortodonticheskom lechenii elaynerami. Stomatologiya detskogo vozrasta i profilaktika. 2022;22(1):58-62. [Danilova M.A., Dmitrienko I.V., Arutyunyan L.I. 3D cephalometric assessment of bone tissue condition during the orthodontic treatment with clear aligners. Pediatric Dentistry and Dental Prophylaxis. 2022;22(1):58-62. (In Russ.)]. https://www.elibrary.ru/item.asp?id=48202581
12. Dem'yanenko S.A., Pen'kova Ya.Yu., Morozov A.L. Cifrovye tehnologii v ortodontii na primere izgotovleniya elaynerov: obzornaya stat'ya. Rossiyskiy stomatologicheskiy zhurnal. 2025;29(1):79-88. [Demyanenko S.A., Penkova Y.Y., Morozov A.L. Aligner manufacturing as an example of digital technology in orthodontics: A review. Russian Journal of Dentistry. 2025;29(1):79-88. (In Russ.)]. https://doi.org/10.17816/dent642024
13. Drobysheva N.S., Mallaeva A.B., Petrovskaya V.V., Dibirova P.Sh., Lezhnev D.A., Drobysheva L.A. Sovershenstvovanie protokolov analiza konusno-luchevyh komp'yuternyh tomogramm ortodonticheskih pacientov. Klinicheskaya stomatologiya. 2022;25(2):112-118. [Drobysheva N.S., Mallaeva A.B., Petrovskaya V.V., Dibirova P.Sh., Lezhnev D.A., Drobysheva L.A. Improvement of the protocols for the analysis of cone-beam computed tomograms of orthodontic patients. Clinical Dentistry. 2022;25(2):112-118. (In Russ.)]. https://doi.org/10.37988/1811-153X_2022_2_112
14. Drobyshev A.Yu., Izotov O.I., Sviridov E.G., Sorokina M.S., Toniya D.S., Shipika D.V., avtory; Toniya D.S., Sviridov E.G., Shipika D.V., Drobyshev A.Yu., patentoobladateli. Sposob provedeniya cefalometricheskogo analiza pacientov s anomaliyami i deformaciyami chelyustey na osnovanii opredeleniya estestvennogo polozheniya golovy, komp'yuternoy tomografii cherepa, 3D-skanirovaniya lica i intraoral'nogo skanirovaniya. Rossiyskaya Federaciya patent RU 2839303. Opubl. 29.04.2025. [Drobyshev A.Y., Izotov O.I., Sviridov E.G., Sorokina M.S., Toniya D.S., Shipika D.V., inventors; Toniya D.S., Sviridov E.G., Shipika D.V., Drobyshev A.Y., assignee. Method for cephalometric analysis of patients with abnormalities and deformations of jaws based on determining natural position of head, computed tomography of skull, 3d face scanning and intraoral scanning. Russian Federation patent RU 2839303. Date of publication: 29.04.2025. (In Russ.)]. https://www.elibrary.ru/item.asp?id=82330805
15. Dybov A.M., Li Czinin', Gao Yuychen, Dudnik O.V. 3D-skanirovaniya v diagnostike i profilaktike stomatologicheskih zabolevaniy u detey. Stomatologiya dlya vseh. 2025;(1):64-68. [Dybov A.M., Li Jining, Gao Yucheng, Dudnik O.V. 3D scanning in diagnostics and prevention of dental diseases in children. International Dental Review. 2025;(1):64-68. (In Russ.)]. https://www.elibrary.ru/item.asp?id=82603306
16. Ignat'eva L.A., Hamitova N.H., Petrischenko E. Primenenie iskusstvennogo intellekta v stomatologii. Institut stomatologii. 2025;(1):104-105. [Ignatieva L.A., Khamitova N.Kh., Petrishchenko E. The use of artificial intelligence in dentistry. The Dental Institute. 2025;(1):104-105. (In Russ.)]. https://www.elibrary.ru/item.asp?id=82347052
17. Karapetyan A.A., Uhanov M.M., Ryahovskiy A.N. 3D-pechat' iz metallov v stomatologii. Stomatologiya. 2022;101(5):85-91. [Karapetyan A.A., Ukhanov M.M., Ryahovsky A.N. Metal 3D printing in dentistry. Stomatology. 2022;101(5):85‑91. (In Russ.)]. https://doi.org/10.17116/stomat202210105185
18. Kolapova N.D., Grechishnikova D.R., Yakubova M.R., Shigapova A.R., Markosyan A.G., Begu A.A. i dr. Intraoral'noe skanirovanie: novyy uroven' tochnosti i komforta v stomatologii. Mezhdunarodnyy nauchno-issledovatel'skiy zhurnal. 2025;(6). [Kolapova N.D., Grechishnikova D.R., Yakubova M.R., Shigapova A.R., Markosyan A.G., Begu A.A. et al. Intraoral scanning: a new level of precision and comfort in dentistry. International Research Journal. 2025;(6). (In Russ.)]. https://doi.org/10.60797/IRJ.2025.156.76
19. Kolpakova D.Yu., Moskovskiy A.V., Urukov Yu.N., Moskovskaya O.I. CAD/CAM-tehnologii. Intraoral'naya vizualizaciya. Zdravoohranenie Chuvashii. 2023;(4):126-129. [Kolpakova D.Yu., Moskovsky A.V., Urukov Yu.N., Moskovskaya O.I. CAD/CAM-technologies. Intraoral imaging. Zdravoohranenie Čuvašii. 2023;(4):126-129. (In Russ.)]. https://elibrary.ru/item.asp?id=60271859
20. Kolchin S.A., Drobyshev A.Yu., Kurakin K.A., Dibirov T.M., Miterev A.A. Ispol'zovanie 3D-tehnologiy pri planirovanii ortognaticheskih operaciy u pacientov s anomaliyami razvitiya chelyustey. Endodontiya Today. 2022;20(2):183-188. [Kolchin S.A., Drobyshev A.Yu., Kurakin K.A., Dibirov T.M., Miterev A.A. The use of 3D technologies in the planning of orthognathic operations in patients with anomalies in the development of the jaws. Endodontics Today. 2022;20(2):183-188. (In Russ.)]. https://doi.org/10.36377/1726-7242-2022-20-2-189-196
21. Kolchin S.A., Drobyshev A.Yu., Kurakin K.A., Dibirov T.M., Miterev A.A. Ocenka tochnosti posleoperacionnyh rezul'tatov virtual'nogo planirovaniya hirurgicheskogo etapa kombinirovannogo lecheniya pacientov s gnaticheskimi formami patologii prikusa. Head and neck. Golova i sheya. Rossiyskiy zhurnal. 2024;12(2):31-38. [Kolchin S.A., Drobyshev A.Yu., Kurakin K.A., Dibirov T.M., Miterev A.A. Assessing the accuracy of postoperative results of virtual planning of the surgical stage in the combined treatment of patients with gnathic forms of malocclusion. Head and neck. Russian Journal. 2024;12(2):31–38. (In Russ.)]. https://doi.org/10.25792/HN.2024.12.2.31-38
22. Mammedov S.M., Bersanov R.U., Mohammad M.F., Alobayat A.H.A., Takaeva L.S. Neyrosetevoy analiz konusno-luchevyh KT-izobrazheniy (KLKT) v stomatologii: sistematicheskiy obzor, metodicheskie orientiry i klinicheskie scenarii primeneniya. Vestnik KNII RAN. Seriya: Estestvennye i tehnicheskie nauki. 2025;(4):62-68. [Mammedov S.M., Bersanov R.U., Mohammad M.F., Alobayat A.Kh.A., Takaeva L.S. Neural network analysis of cone-beam ct (CBCT) images in dentistry: a systematic review, methodological guidelines, and clinical application scenarios. Vestnik KNII RAN. Seriâ "Estestvennye i tehničeskie nauki". 2025;(4):62-68. (In Russ.)]. https://doi.org/10.69537/VKNIIRAN.2025.23.4.008
23. Oborotistov N.Yu., Vracheva D.N. Primenenie cifrovyh tehnologiy i 3D-cefalometricheskogo analiza pri planirovanii ortodonticheskogo lecheniya i ocenki estetiki lica. Rossiyskaya stomatologiya. 2025;18(4):12-19. [Oborotistov N.Yu., Vracheva D.N. Using digital technologies and 3D cephalometric analysis in orthodontic treatment planning and facial aesthetics assessment. Russian Journal of Stomatology. 2025;18(4):12‑19. (In Russ.)]. https://doi.org/10.17116/rosstomat20251804112
24. Oborotistov N.Yu., Muraev A.A., Ivanov S.Yu., Persin L.S., Aleshina O.A., Mokrenko M.E., Ershov M.V. i dr. 3D-cefalometriya lica s primeneniem iskusstvennogo intellekta. Ortodontiya. 2023;(1):6-15. [Oborotistov N.Yu., Muraev A.A., Shiryaeva T.V., Ivanov S.Yu., Persin L.S., Oleshina O.A. et al. Optimization of the three-dimensional cephalometric analysis using deep machine learning. Orthodontia. 2023;(1):6-15. (In Russ.)]. https://www.elibrary.ru/item.asp?id=54887102
25. Oborotistov N.Yu., Muraev A.A., Sen'ko D.A. Innovacionnaya onlayn-platforma ViSurgery dlya rascheta telerentgenogramm s ispol'zovaniem iskusstvennogo intellekta. Ortodontiya. 2022;(4):15-20. [Oborotistov N.Yu., Muraev A.A., Senko D.A. Visurgery, a new online platform for 2d-cephalometric analysis using artificial intelligence. Orthodontia. 2022;(4):15-20. (In Russ.)]. https://www.elibrary.ru/item.asp?id=50253627
26. Osipov G.G., Abramyanc A.A., Chikunov S.O., Gil'manova N.S., Mihaylova M.V., Yudin D.K. i dr. Razrabotka polnost'yu cifrovogo protokola planirovaniya i reabilitacii pacientov s zabolevaniem VNChS. Institut stomatologii. 2024;(1):23-25. [Osipov G.G., Abramyants A.A., Chikunov S.O., Gilmanova N.S., Mikhailova M.V., Yudin D.K. et al. Development of a fully digital protocol for planning and rehabilitation of patients with TMJ disease. The Dental Institute. 2024;(1):23-25. (In Russ.)]. https://www.elibrary.ru/item.asp?id=65646861
27. Ovcharenko E.N., Zaredinova T.R., Kurtmulaeva L.N., Tasinov A.E., Tasinov E.E., Raupova R.I. Intraoral'noe skanirovanie v sovremennoy stomatologii: preimuschestva, nedostatki i perspektivy razvitiya. Sovremennaya nauka: aktual'nye problemy teorii i praktiki. Seriya: Estestvennye i tehnicheskie nauki. 2024;(3-2):121-126. [Ovcharenko E.N., Zaredinova T.R., Kurtmulaeva L.N.K., Tasinov A.E., Tasinov E.E., Raupova R.I. Intraoral scanning in modern dentistry: advantages, disadvantages, and development prospects. Modern Science: Actual Problems of Theory and Practice. Series: Natural and Technical Sciences. 2024;(3-2):121-126. (In Russ.)]. http://www.nauteh-journal.ru/index.php/3/2024/%E2%84%9603/2/a2647fd7-bc6d-441d-a36b-dad58e1a1882
28. Arsenina O.I., Popova N.V., Popova A.V., Mahortova P.I., Gluhova N.V., Kozachenko V.E. i dr. avtory; Federal'noe gosudarstvennoe byudzhetnoe uchrezhdenie Nacional'nyy medicinskiy issledovatel'skiy centr "Central'nyy nauchno-issledovatel'skiy institut stomatologii i chelyustno-licevoy hirurgii" Ministerstva zdravoohraneniya Rossiyskoy Federacii, patentoobladatel'. Sposob rasshireniya verhney chelyusti u pacientov s suzheniem verhney chelyusti i ortodonticheskiy apparat dlya ego realizacii. Rossiyskaya Federaciya patent RU 2766675. Opubl. 15.03.2022. [Arsenina O.I., Popova N.V., Popova A.V., Makhortova P.I., Glukhova N.V., Kozachenko V.E. et al. inventors; Federalnoe gosudarstvennoe byudzhetnoe uchrezhdenie Natsionalnyj meditsinskij issledovatelskij tsentr "Tsentralnyj nauchno-issledovatelskij institut stomatologii i chelyustno-litsevoj khirurgii" Ministerstva zdravookhraneniya Rossijskoj Federatsii, assignee. Method forexpansion of the upperjaw in patients with narrowing of the upper jaw and orthodontic apparatus for its implementation. Russian Federation patent RU 2766675. Date of publication: 15.03.2022. (In Russ.)]. https://www.elibrary.ru/item.asp?id=48140872
29. Roschin E.M. Personalizirovannaya cifrovaya ortodontiya: ispol'zovanie 3D-tehnologiy dlya planirovaniya i prognozirovaniya rezul'tatov lecheniya. Sovremennaya nauka: aktual'nye problemy teorii i praktiki. Seriya: Estestvennye i tehnicheskie nauki. 2024;(6-2):203-207. [Roshchin E.M. Personalized digital orthodontics: using 3D technologies to plan and predict treatment outcomes. Modern Science: Actual Problems of Theory and Practice. Series: Natural and Technical Sciences. 2024;(6-2):203-207. (In Russ.)]. http://www.nauteh-journal.ru/index.php/3/2024/%E2%84%9606/2/ebf2f831-df20-4a63-8e65-a7d23ece67ea
30. Tekucheva S.V., Losev F.F., Cholokava T.D., Skorobogat'ko E.S., Klipa I.A., Karimova Yu.A. Planirovanie kompleksnogo ortodonto-hirurgicheskogo lecheniya pacientov so skeletnymi formami zubochelyustnyh anomaliy na osnove primeneniya cifrovyh 3D-tehnologiy. Stomatologiya. 2025;104(6-2):84-93. [Tekucheva S.V., Losev F.F., Cholokava T.D., Skorobogatko E.S., Klipa I.A., Karimova I.A. Comprehensive orthodontic-surgical treatment planning for patients with skeletal dentofacial anomalies based on the digital 3D-technologies. Stomatology. 2025;104(6‑2):84‑93. (In Russ.)]. https://www.elibrary.ru/item.asp?id=86186648
31. Timchuk Ya.I., Titkova V.V. Ocenka effektivnosti modernizirovannogo podhoda k lecheniyu elaynerami s ispol'zovaniem 3D-monitoringa i referensnyh znacheniy. Stomatologiya. Estetika. Innovacii. 2025;9(3):278-287. [Timchuk Ya., Titkova V. Evaluation of the effectiveness of a modernized approach to aligner treatment using 3D-monitoring and reference values. Dentistry. Aesthetics. Innovations. 2025;9(3):278-287. (In Russ.)]. https://doi.org/10.34883/PI.2025.9.3.005
32. Fadeev R.A., Lanina A.N., Vishneva N.V. MSARME — metodika apparaturno-hirurgicheskogo rasshireniya verhney chelyusti. Institut stomatologii. 2025;(1):38-41. [Fadeev R.A., Lanina A.N., Vishnyova N.V. MSARME - a method of miniscrew-surgically-assisted rapid maxillary expansion. The Dental Institute. 2025;(1):38-41. (In Russ.)]. https://www.elibrary.ru/item.asp?id=82347031
33. Fedorova A.V., Soldatov V.S., Soldatova L.N., Iordanishvili A.K. Prikladnye aspekty primeneniya elaynerov u detey. Institut stomatologii. 2024;(3):32-35. [Fedorova A.V., Soldatov V.S., Soldatova L.N., Jordanishvili A.K. Practical aspects of use of aligners in children. The Dental Institute. 2024;(3):32-35. (In Russ.)]. https://www.elibrary.ru/item.asp?id=73733831
34. Chibisova M.A., Hoschevskaya I.A., Goncharova S.V. Vozmozhnosti i osobennosti primeneniya konusno-luchevoy komp'yuternoy tomografii (KLKT) v ambulatornoy stomatologicheskoy praktike pri obsledovanii pacientov detskogo vozrasta. Institut stomatologii. 2022;(3):34-39. [Chibisova M.A., Hoshchevskaya I.A., Goncharova S.V. Features and features application of cone beam computed tomography (CBCT) in outpatient dental practice when examining pediatric patients. The Dental Institute. 2022;(3):34-39. (In Russ.)]. https://www.elibrary.ru/item.asp?id=49483799
35. Shkarin V.V., Makedonova Yu.A., Yarygina E.N., Veysgeym L.D., D'yachenko D.Yu., Gavrikova L.M. Ocenka diagnosticheskoy vozmozhnosti obuchennoy neyrosetevoy modeli v stomatologii. Klinicheskaya stomatologiya. 2025;28(1):116-123. [Shkarin V.V., Makedonova Yu.A., Iarygina E.N., Veisgeim L.D., Dyachenko D.Yu., Gavrikova L.M. Evaluation of the diagnostic capability of a trained neural network model in dentistry. Clinical Dentistry (Russia). 2025;28(1):116-123. (In Russ.)]. https://doi.org/10.37988/1811-153X_2025_1_116
36. Alhabshi M.O., Aldhohayan H., BaEissa O.S., Al Shehri M.S., Alotaibi N.M., Almubarak S.K. et al. Role of three-dimensional printing in treatment planning for orthognathic surgery: a systematic review. Cureus. 2023;15(10):e47979. https://doi.org/10.7759/cureus.47979
37. André C.B., Pasqua B.P.M., Jacquier G.A., Nascimento F.D. Miniscrew-assisted rapid palatal expansion (MARPE): factors influencing planning. Dental Press Journal of Orthodontics. 2024;29(3):e242439. https://doi.org/10.1590/2177-6709.29.3.e242439.oar
38. Badiali G., Bevini M., Gulotta C., Lunari O., Incerti Parenti S., Pironi M. et al. Three-dimensional cephalometric outcome predictability of virtual orthodontic-surgical planning in surgery-first approach. Progress in Orthodontics. 2022;23(1):51. https://doi.org/10.1186/s40510-022-00448-x
39. Chen Y., Wei J. Application of 3D printing technology in dentistry: a review. Polymers. 2025;17(7):886. https://doi.org/10.3390/polym17070886
40. Christopoulou I., Kaklamanos E.G., Makrygiannakis M.A., Bitsanis I., Perlea P., Tsolakis A.I. Intraoral scanners in orthodontics: a critical review. International Journal of Environmental Research and Public Health. 2022;19(3):1407. https://doi.org/10.3390/ijerph19031407
41. Cui Z., Fang Y., Mei L., Zhang B., Yu B., Liu J. et al. A fully automatic AI system for tooth and alveolar bone segmentation from cone-beam CT images. Nature Communications. 2022;13(1):2096. https://doi.org/10.1038/s41467-022-29637-2
42. Dipalma G., Inchingolo A.D., Inchingolo A.M., Piras F., Carpentiere V., Garofoli G. et al. Artificial intelligence and its clinical applications in orthodontics: a systematic review. Diagnostics. 2023;13(24):3677. https://doi.org/10.3390/diagnostics13243677
43. Dubey S., Prasad Dash B., Mohanty B., Jena S., Sahoo N., Singh S. 3D printing in orthodontics — past, present and future: a systematic review and meta-analysis. Bioinformation. 2025;21(6):1766-1774. https://doi.org/10.6026/973206300211766
44. Eggmann F., Blatz M.B. Recent advances in intraoral scanners. Journal of Dental Research. 2024;103(13):1349-1357. https://doi.org/10.1177/00220345241271937
45. Goracci C., Juloski J., D’Amico C., Balestra D., Volpe A., Juloski J. et al. Clinically relevant properties of 3D printable materials for intraoral use in orthodontics: a critical review of the literature. Materials. 2023;16(6):2166. https://doi.org/10.3390/ma16062166
46. Hendrickx J., Gracea R.S., Vanheers M., Winderickx N., Preda F., Shujaat S. et al. Can artificial intelligence-driven cephalometric analysis replace manual tracing? A systematic review and meta-analysis. European journal of orthodontics. 2024;46(4):cjae029. https://doi.org/10.1093/ejo/cjae029
47. Khabadze Z., Mordanov O., Shilyaeva E. Comparative analysis of 3D cephalometry provided with artificial intelligence and manual tracing. Diagnostics. 2024;14(22):2524. https://doi.org/10.3390/diagnostics14222524
48. Kazimierczak N., Kazimierczak W., Serafin Z., Nowicki P., Nożewski J., Janiszewska-Olszowska J. AI in orthodontics: revolutionizing diagnostics and treatment planning — a comprehensive review. Journal of Clinical Medicine. 2024;13(2):344. https://doi.org/10.3390/jcm13020344
49. Liu J., Hao J., Lin H., Pan W., Yang J., Feng Y. et al. Deep learning-enabled 3D multimodal fusion of cone-beam CT and intraoral mesh scans for clinically applicable tooth-bone reconstruction. Patterns. 2023;4(9):100825. https://doi.org/10.1016/j.patter.2023.100825
50. Liu J., Zhang C., Shan Z. Application of artificial intelligence in orthodontics: current state and future perspectives. Healthcare. 2023;11(20):2760. https://doi.org/10.3390/healthcare11202760
51. Mohammed Alassiry A. Clinical aspects of digital three-dimensional intraoral scanning in orthodontics — a systematic review. Saudi Dental Journal. 2023;35(5):437-442. https://doi.org/10.1016/j.sdentj.2023.04.004
52. Narongdej P., Hassanpour M., Alterman N., Rawlins-Buchanan F., Barjasteh E. Advancements in clear aligner fabrication: a comprehensive review of direct-3D printing technologies. Polymers. 2024;16(3):371. https://doi.org/10.3390/polym16030371
53. Nordblom N.F., Büttner M., Schwendicke F. Artificial intelligence in orthodontics: critical review. Journal of Dental Research. 2024;103(6):577-584. https://doi.org/10.1177/00220345241235606
54. Olawade D.B., Leena N., Egbon E., Rai J., Mohammed A.P.E.K., Oladapo B.I. et al. AI-driven advancements in orthodontics for precision and patient outcomes. Dentistry Journal. 2025;13(5):198. https://doi.org/10.3390/dj13050198
55. Pellitteri F., Albertini P., Vogrig A., Spedicato G.A., Siciliani G., Lombardo L. Comparative analysis of intraoral scanners accuracy using 3D software: an in vivo study. Progress in Orthodontics. 2022;23(1):21. https://doi.org/10.1186/s40510-022-00416-5
56. Polizzi A., Leonardi R. Automatic cephalometric landmark identification with artificial intelligence: an umbrella review of systematic reviews. Journal of Dentistry. 2024;146:105056. https://doi.org/10.1016/j.jdent.2024.105056
57. Ruiz D.C., Mureșanu S., Du X., Elgarba B.M., Fontenele R.C., Jacobs R. Unveiling the role of artificial intelligence applied to clear aligner therapy: a scoping review. Journal of Dentistry. 2025;154:105564. https://doi.org/10.1016/j.jdent.2025.105564
58. Sabbagh H., Khazaei Y., Baumert U., Hoffmann L., Wichelhaus A., Janjic Rankovic M. Bracket transfer accuracy with the indirect bonding technique — a systematic review and meta-analysis. Journal of Clinical Medicine. 2022;11(9):2568. https://doi.org/10.3390/jcm11092568
59. Schobben R.R.P., Rangel F.A., Bruggink R., Crins-de Koning M.L.D., Bronkhorst E.M., Ongkosuwito E.M. Two experimental methods to integrate intra-oral scans into 3D stereophotogrammetric facial images. Clinical Oral Investigations. 2025;29(1):54. https://doi.org/10.1007/s00784-024-06138-8
60. Siddhisaributr P., Khlongwanitchakul K., Anuwongnukroh N., Manopatanakul S., Viwattanatipa N. Effectiveness of miniscrew assisted rapid palatal expansion using cone beam computed tomography: a systematic review and meta-analysis. Korean Journal of Orthodontics. 2022;52(3):182-200. https://doi.org/10.4041/kjod21.256
61. Talmaceanu D., Bolog N., Leucuta D., Tig I.A., Buduru S. Diagnostic use of computerized axiography in TMJ disc displacements. Experimental and Therapeutic Medicine. 2022;23(3):213. https://doi.org/10.3892/etm.2022.11137
62. Tanikawa C., Nakamura H., Mimura T., Uemura Y., Yamashiro T. Development of artificial intelligence-supported automatic three-dimensional surface cephalometry. Orthodontics & Craniofacial Research. 2025;28(4):636-646. https://doi.org/10.1111/ocr.12914
63. Wang H., Minnema J., Batenburg K.J., Forouzanfar T., Hu F.J., Wu G. Multiclass CBCT image segmentation for orthodontics with deep learning. Journal of Dental Research. 2021;100(9):943-949. https://doi.org/10.1177/00220345211005338
64. Zinelis S., Polychronis G., Papadopoulos F., Kokkinos C., Economou A., Panayi N. et al. Mechanical and electrochemical characterization of 3D printed orthodontic metallic appliances after in vivo ageing. Dental Materials. 2022;38(11):1721-1727. https://doi.org/10.1016/j.dental.2022.09.002
