FUNCTIONAL NANOSTRUCTURED MATERIALS BASED ON TITANIUM DIOXIDE FOR USE IN ORTHOPEDIC DENTISTRY
Abstract and keywords
Abstract (English):
Subject. The creation of functional ceramic coatings based on titanium dioxide for the manufacture of orthopedic structures, including dental implants and systems for osteosynthesis, helps to prevent possible complications during dental surgical and orthopedic treatment by improving the processes of osseointegration. The goal is to develop domestic proprietary technology for producing nanopowders and functional coatings based on titanium dioxide, free of chemical impurities, which can be used in the practice of orthopedic dentistry for the construction of dental and maxillary prostheses, as well as implant systems. Methodology. The authors developed and proposed a method for applying to medical devices made of titanium, a nanostructured surface layer of titanium dioxide. To provide an evidence base for the advantages of using the proposed titanium dioxide coating, an experimental study was made of its chemical uniformity and freedom from impurities, as well as an assessment of the adhesion force between the oxide layer deposited by titanium dioxide in the anatase phase and the surface of the titanium support. Results. During Raman spectroscopy, titanium dioxide nanopowder did not detect extraneous chemical impurities. According to the results of the method of thermal desorption of nitrogen, the specific surface of the titanium dioxide powder was 67-70 m2 / g, and the average calculated particle size was 20-22 nm. It was shown by optical microscopy that the average thickness of the oxide layer (rutile phase) is 15 ± 5 μm, anatase is 70 ± 10 μm, the adhesion force between the oxide layer (rutile phase) and the titanium base is 6.3 ± 0.1 MPa, at applying anatase - 4.9 ± 0.1 MPa. In the study of the adhesion force of a functional titanium dioxide coating with a titanium base, it was found that the onset of peeling occurs at a load of 8.6 N. Conclusions. Studies of a highly developed functional surface layer of nanostructured titanium dioxide indicate the wide possibilities of its use in the practice of a dentist.

Keywords:
titanium dioxide, functional coating, adhesion force, dental implantation, nanopowder
References

1. Barinov, S. M. (2010). Keramicheskiye i kompozitsionnyye materialy na osnove fosfatov kal'tsiya dlya meditsiny [Ceramic and composite materials based on calcium phosphates for medicine]. Uspekhi khimii [Success of chemistry], 1 (79), 15-32. (In Russ.) doi.org/10.1070/RC2010v079n01ABEH004098

2. Lebedenko, I. Yu., Parunov, V. A., Anisimova, S. V. (2006). Ispol'zovaniye otechestvennykh splavov blagorodnykh metallov v ortopedicheskoy stomatologii [The use of domestic alloys of precious metals in orthopedic dentistry]. Stomatologiya [Dentistry], 5, 52- 55. (In Russ.)

3. Bogomolova, N. N., Malchikhina, A. I., Shesterikov, E. V., Tverdokhlebov, S. I. et al. (2013). Uluchsheniye funktsional'nykh kharakteristik intramedullyarnykh implantatov putem primeneniya mnogosloynykh biosovmestimykh pokrytiy [Improving the functional characteristics of intramedullary implants by applying multilayer biocompatible coatings]. Materialy III Mezhdunarodnoy nauchno-prakticheskoy konferentsii. Osobennosti formirovaniya nanostrukturirovannykh biokeramicheskikh pokrytiy [Materials of the III International Scientific and Practical Conference. Features of the formation of nanostructured bioceramic coatings], Tomsk, 17-21. (In Russ.)

4. Zholudev, S. E. (1995). Metally i splavy, primenyayemyye v ortopedicheskoy stomatologii [Metals and alloys used in orthopedic dentistry]. Ekaterinburg, 70. (In Russ.)

5. Kiparisov, Yu. S. (2016). Effektivnost' ortopedicheskogo lecheniya patsiyentov s defektami chelyustno-litsevoy oblasti s uchetom dental'nykh mini-implantatov [The effectiveness of orthopedic treatment of patients with acquired defects of the maxillofacial region using dental mini-implants]. Permskiy meditsinskiy zhurnal [Perm Medical Journal], 3 (33), 110-114. (In Russ.)

6. Rogozhnikov, G. I., Chetvertnykh, V. A. et al. (2007). Splavy titana v ortopedicheskoy stomatologii [Titanium alloys in orthopedic dentistry]. Perm : Perm State Medical Academy, 192. (In Russ.)

7. Trofimov, V. V., Fedchishin, O. V., Klimenov, V. A. (2009). Titan, splavy titana i primeneniye ikh v stomatologii [Titanium, titanium alloys and their use in dentistry]. Sibirskiy meditsinskiy zhurnal [Siberian Medical Journal], 7 (90), 10-12. (In Russ.)

8. Goiato, M. C., dos Santos, D. M., Moreno, A. et al. (2011). Prosthetic treatments for patients with oronasal communication. J. Cranioface Surg, 22 (4), 1445-1447.

9. Tara, M. A., Eschbach, S., Bohlsen, F., Kern, M. (2011). Clinical outcome of metal-ceramic crowns fabricated with laser-sintering technology. Int. J. Prosthodont, 24, 46-48.

10. Antsiferov, V. N., Antsiferova, I. V. (2014). Nanotekhnologii i nanomaterialy, riski [Nanotechnology and nanomaterials, risks]. Ekaterinburg : Ural Branch of RAS, 222. (In Russ.)

11. Kolobov, Yu. R., Khramov, G. V., Kudryashov, S. I., Kolobova, A. Yu. (2010). Zakonomernosti formirovaniya bioaktivnykh/bioinertnykh pokrytiy i ikh vliyaniye na svoystva meditsinskikh titanovykh splavov [Patterns of formation of bioactive / bioinert coatings and their effect on the properties of medical titanium alloys]. Materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii «Novyye tekhnologii sozdaniya i primeneniya biokeramiki v vosstanovitel'noy meditsine» [Materials of the International scientific-practical conference "New technologies for the creation and use of bioceramics in regenerative medicine"], Tomsk, 107-112. (In Russ.)

12. Ignatov, V. P. et al. (2009). Formirovaniye biosovmestimykh pokrytiy s zadannymi svoystvami [Formation of biocompatible coatings with desired properties]. Sbornik tezisov dokladov «Biomaterialy v meditsine». Vserossiyskoye soveshchaniye [Collection of abstracts of reports “Biomaterials in medicine”. All-Russian meeting], Moscow, 43-44. (In Russ.)

13. Shuliatnikova, O. A., Rogozhnikov, G. I. (2017). Morfologicheskoye issledovaniye organov i tkaney eksperimental'nykh zhivotnykh pri vnutrimyshechnoy implantatsii dioksidtitanovykh obraztsov s nanostrukturirovannoy poverkhnostnost'yu (eksperimental'no-laboratornoye issledovaniye [Morphological study of organs and tissues of experimental animals during intramuscular implantation of titanium dioxide samples with nanostructured surface (experimental laboratory study)]. Ural'skiy meditsinskiy zhurnal [Ural Medical Journal], 3 (147), 63-67. (In Russ.)

14. Bogomolova, N. N., Malchikhina, A. I., Shesterikov, E. V. et al. (2013). Uluchsheniye funktsional'nykh kharakteristik intramedullyarnykh implantatov putem naneseniya mnogosloynykh biosovmestimykh pokrytiy [Improving the functional characteristics of intramedullary implants by applying multilayer biocompatible coatings]. Materialy III Mezhdunarodnoy nauchno-prakticheskoy konferentsii. Osobennosti formirovaniya nanostrukturirovannykh biokeramicheskikh pokrytiy [Materials of the III International Scientific and Practical Conference. Features of the formation of nanostructured bioceramic coatings], Tomsk, 17-21. (In Russ.)

15. Heinrich, A., Dengler, K., et al. (2014). Lazernoye modifitsirovaniye titanovykh implantatov s tsel'yu uluchsheniya kletochnoy adgezii [Laser modification of titanium implants to improve cell adhesion]. Stomatolog-praktik [Dental practitioner], 4, 7-9. (In Russ.)

16. Chaykina, M. V., Bulina, N. V., Prosanov, I. Yu. et al. (2010). Materialy dlya pokrytiya implantatov i keramika na osnove gidroksiappatita s zameshcheniyami [Materials for coating implants and ceramics based on hydroxyappatite with substitutions]. Materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii «Novyye tekhnologii sozdaniya i primeneniya biokeramiki v vosstanovitel'noy meditsine» [Materials of the International scientific-practical conference "New technologies for the creation and use of bioceramics in regenerative medicine"], Tomsk, 190-196. (In Russ.)

17. Lyasnikova, A. V., Dudareva, O. A. (2012). Tekhnologiya sozdaniya mnogofunktsional'nykh kompozitsionnykh pokrytiy [Technology for creating multifunctional composite coatings]. Moscow : Special book, 301. (In Russ.)

18. Melnikova, I. P., Lyasnikova, A. V., Lyasnikov, V. N. (2010). Issledovaniye vozmozhnosti povysheniya funktsional'nykh kharakteristik biosovmestimykh pokrytiy meditsinskikh implantatov za schet izmeneniya morfologii chastits poroshkov pered elektroplazmennym napyleniyem [Investigation of the possibility of increasing the functional characteristics of biocompatible coatings of medical implants by changing the morphology of powder particles before electroplasma spraying]. Vestnik Saratovskogo gosudarstvennogo tekhnicheskogo universiteta [Bulletin of the Saratov State Technical University], 3 (46), 68-76. (In Russ.)

19. Melnikova, I. P., Lyasnikova, A. V., Lyasnikov, V. N. (2013). Osobennosti formirovaniya nanostrukturirovannykh biokeramicheskikh pokrytiy [Features of the formation of nanostructured bioceramic coatings]. Materialy III Mezhdunarodnoy nauchno-prakticheskoy konferentsii [Materials of the III International Scientific and Practical Conference], Tomsk, 107-112. (In Russ.)

20. Gurov, A. A., Karmanov, V. I., Porozova, S. E., Shokov, V. O. (2014). Sintez i svoystva nanoporoshka dioksida titana dlya polucheniya funktsional'nykh materialov [Synthesis and properties of titanium dioxide nanopowder to obtain functional materials]. Vestnik PNIPU: Mashinostroyeniye, materialovedeniye [Bulletin of PNIPU: Engineering, materials science], 1, 23-29. (In Russ.)

21. Gurov, A. A., Porozova, S. E. (2016). Sozdaniye polifaznyy keramicheskikh obraztsov na osnove nanorazmernogo dioksida titana [Creating polyphase ceramic samples based on nanoscale titanium dioxide]. Master’s Journal [Master’s Journal], 1, 36-40. (In Russ.)

22. Gurov, A. A., Porozova, S. E. (2012). Polucheniye dioksida titana iz vodno-etanol'nykh rastvorov s polimernymi dobavkami [Obtaining titanium dioxide from water-ethanol solutions with polymer additives]. Sbornik materialov III Vserossiyskoy molodezhnoy konferentsii s elementami nauchnoy shkoly «Funktsional'nyye materialy i vysokochistyye veshchestva». M.: Izd - vo IMET RAN, RKHTU im. D.I. Mendeleyeva [The collection of materials of the III All-Russian youth conference with elements of the scientific school "Functional materials and high-purity substances"], Moscow : Publishing House - IMET RAS, RCTU named after DI. Mendeleev, 187-188. (In Russ.)

23. Gurov, A. A., Porozova, S. E., Rogozhnikov, A. G., Shuliatnikova, O. A. (2017). Sposob modifitsirovaniya poverkhnosti titanovykh implantatov [The method of surface modification of titanium implants]. Ofitsial'nyy byulleten'. Izobreteniya, poleznyye modeli [Official newsletter. Inventions, utility models], 26 (2630578), 3. (In Russ.)

24. Shuliatnikova, O. A., Rogozhnikov, G. I., Porozova, S. E. et al. (2015). Dental'nyy implantat [Dental implant]. Ofitsial'nyy byulleten'. Izobreteniya, poleznyye modeli [Official newsletter. Inventions, utility models], 22 (153902), 3. (In Russ.)

25. Kostrzhitsky, A. I., Karpov, V. F., Kabanchenko, M. P. et al. (1991). Spravochnik operatora ustanovok po naneseniyu pokrytiy v vakuume [Vacuum Coating Machine Operator's Guide]. Moscow : Engineering, 176. (In Russ.)

26. Putlyaev, V. I. (2004). Sovremennyye biokeramicheskiye materialy [Modern bioceramic materials]. Sorosovskiy obrazovatel'nyy zhurnal [Soros Educational Journal], 1 (8), 44-50. (In Russ.)


Login or Create
* Forgot password?