graduate student
Moscow, Moscow, Russian Federation
Moscow, Moscow, Russian Federation
Moscow, Moscow, Russian Federation
UDC 616.31
This paper presents the results of a comparative experimental study of the strength characteristics of blocks made from a domestic composite material and foreign analogues used in prosthetic dentistry. The tests were carried out to determine resistance to diametral tensile strength in strict accordance with the requirements of current regulatory documents and GOST standards, which ensured the comparability and reproducibility of the obtained results. The aim of the study was a comprehensive assessment of the mechanical properties of the Russian composite material in order to determine the feasibility of its use in the fabrication of dental crowns and other prosthetic structures operating under increased functional loads. For the study, standard specimens of composite blocks were manufactured and tested under identical loading conditions, deformation rates, and temperature regimes. The experimental data obtained were subjected to statistical processing and comparative analysis with the corresponding indicators of foreign materials widely used in clinical practice. Particular attention was paid to the evaluation of ultimate strength values and the fracture behavior of the specimens. As a result of the study, it was established that the domestic composite material demonstrates a level of diametral tensile strength comparable to that of foreign analogues and, in some cases, is not inferior to them in terms of key mechanical characteristics. This indicates the high quality of the developed material and its potential for practical application in dentistry. The obtained results confirm the possibility of using the Russian composite material in the fabrication of crowns and other prosthetic restorations, and also create prerequisites for the further development and improvement of domestic dental composite materials and the expansion of their clinical application.
composite material, strength, diametral tensile strength, GOST, dentistry, crown, prosthetic constructions, clinical application
1. Gracis S., Thompson V.P., Ferencz J.L., Silva N.R., Bonfante E.A. A new classification system for all-ceramic and ceramic-like restorative materials. International journal of prosthodontics. 2015;28(3):227–235. https://doi.org/10.11607/ijp.4244
2. Giordano R. Materials for chairside CAD/CAM–produced restorations. Journal of the American Dental Association. 2006;137(Suppl):14S–21S. https://doi.org/10.14219/jada.archive.2006.0397
3. Sripetchdanond J., Leevailoj C. Wear of human enamel opposing monolithic zirconia, glass ceramic, and composite resin: an in vitro study. The Journal of prosthetic dentistry. 2014;112(5):1141-1150. https://pubmed.ncbi.nlm.nih.gov/24980740/
4. Permyakova A.V., Nikolaev A.I. Issledovanie prochnostnyh harakteristik kompozitnogo restavracionnogo materiala rossiyskogo proizvodstva. Prikladnye informacionnye aspekty mediciny. 2020;23(2):64–69. [Permyakova A.V., Nikolaev A.I. Research of strength characteristics of composite restoration material of russian production. Applied Information Aspects of Medicine. 2020;23(2):64–69. (In Russ.)]. https://www.elibrary.ru/item.asp?id=43844624&ysclid=mjgls1yyc0570153009
5. Mel'nik A.S., Goryainova K.E., Lebedenko I.Yu. Obzor sovremennyh materialov dlya izgotovleniya keramicheskih koronok u kresla pacienta metodom komp'yuternogo frezerovaniya. Rossiyskiy stomatologicheskiy zhurnal. 2014;18(6):24-28. [Melnik A.S., Goryainova K.E., Lebedenko I.Y. Review modern materials for the manufacturing ceramic crowns at the chairside by the method of computer milling. Russian Journal of Dentistry. 2014;18(6):24-28. (In Russ.)]. https://doi.org/10.17816/dent.39270
6. Goncharov N.A. Kliniko-laboratornoe obosnovanie primeneniya novogo kompozicionnogo materiala dlya vremennogo protezirovaniya: dissertaciya na soiskanie uchenoy stepeni kandidata medicinskih nauk. Voronezh; 2020. 134 s. [Goncharov N.A. Clinical and laboratory substantiation of the use of a new composite material for temporary prosthetics: dissertation for the degree of Candidate of Medical Sciences. Voronezh; 2020. 134 p. (In Russ.)]. https://vrngmu.ru/upload/iblock/929/929c58a2e477322c45ab258cff1721b0.pdf
7. Goryaynova K.E., Rusanov F.S., Poyurovskaya I.Ya., Retinskaya M.V., Lebedenko I.Yu. Sravnitel'naya ocenka prochnosti stomatologicheskih materialov dlya metodiki cad/cam u kresla pacienta. Rossiyskiy stomatologicheskiy zhurnal. 2016;20(3):116-120. [Goryainova K.E., Rusanov F.S., Poyurovskaya I.Ya., Retinskaya M.V., Lebedenko I.Yu. Comparative assessment of strength of dental cad/cam materials for chairside techniques. 2016;20(3):116-120. (In Russ.)]. https://elibrary.ru/item.asp?id=26331214
