1. Джалалова М.В., Ерошин В.А. Математическое моделирование в задачах стоматологии. Вестник Нижегородского университета им. Н.И. Лобачевского. 2011;(4-2):421-422. [Dzhalalova M.V., Eroshin V.A. Mathematical modeling for the problems of dentistry. Vestnik of Lobachevsky University of Nizhni Novgorod. 2011;(4-2):421-422. (In Russ.)]. https://elibrary.ru/item.asp?id=19527850

2. Доменюк Д.А., Давыдов Б.Н., Дмитриенко С.В., Будайчиев Г.М., Иванюта С.О. Математическое моделирование формы и размеров зубных дуг для выбора тактики и объема ортодонтического лечения у пациентов с аномалиями зубочелюстной системы. Медицинский алфавит. 2018;2(8):7-13. [Domenyuk D.A., Davydov B.N., Dmitrienko S.V., Budaychiev G.M.A., Ivanyuta S.O. Mathematical modeling of form and dimensions of tooth arcs for selection of tactics and volume of orthodontic treatment for patients with anomalies of dentistry system. Medical Alphabet. 2018;2(8):7-13. (In Russ.)]. https://elibrary.ru/item.asp?id=35085913

3. Azizi S., Hatampoor S., Tahamtan S. Applications of artificial intelligence in diagnosis and treatment planning of orthodontics: a narrative review. The Saudi dental journal. 2025;37(7-9):70. https://doi.org/10.1007/s44445-025-00077-0

4. Sitaras S., Tsolakis I.A., Gelsini M, Tsolakis A.I., Schwendicke F., Wolf T.G. et al. Applications of Artificial Intelligence in Dental Medicine: A Critical Review. International dental journal. 2025;75(2):474-486. https://doi.org/10.1016/j.identj.2024.11.009

5. Данилова М.А., Гвоздева Ю.В., Ишмурзин П.В., Кирюхин В.Ю. Обоснование применения эластопозиционера у детей с миофункциональными нарушениями методом математического моделирования. Ортодонтия. 2010. № 4(35). С. 39–41. [5. Danilova M.A., Gvozdeva Yu.V., Ishmurzin P.V., Kiryukhin V.Yu. Substantiation of the use of an elastopositioner in children with myofunctional disorders by mathematical modeling. Orthodontics. 2010. No. 4(35). pp. 39-41. (In Russ.)]. eLIBRARY ID: 17060815.

6. Perrotti G., Baccaglione G., Clauser T., Scaini R., Grassi R., Testarelli L. et al. Total Face Approach (TFA) 3D Cephalometry and Superimposition in Orthognathic Surgery: Evaluation of the Vertical Dimensions in a Consecutive Series. Methods and protocols. 2021;4(2):36. https://doi.org/10.3390/mps4020036

7. Subramanian A.K., Chen Y., Almalki A., Sivamurthy G., Kafle D. Cephalometric Analysis in Orthodontics Using Artificial Intelligence-A Comprehensive Review. BioMed research international. 2022;2022:1880113. https://doi.org/10.1155/2022/1880113

8. Venkatesh E., Elluru S.V. Cone beam computed tomography: basics and applications in dentistry. Journal of Istanbul University Faculty of Dentistry. 2017;51(3 Suppl 1):S102-S121. https://doi.org/10.17096/jiufd.00289

9. Кочконян Т.С., Шкарин В.В., Доменюк Д.А., Дмитриенко Д.С., Потрясова А.М., Рожкова М.Г., Дмитриенко Т.Д. Стратегия ортодонтического лечения у пациентов с асимметрией зубных дуг в диагональном направлении с учетом краниофациальной морфологии. Медицинский алфавит. 2021. № 2. С. 56–63. [Kochkonyan T.S., Dmitrienko S.V., Davydov B.N., Domenyuk D.A., Vedeshina E.G. Strategy of orthodontic treatment in patients with asymmetry of dental arches formed with occlusion anomalies.. (In Russ.)] eLIBRARY ID: 45663242.

10. Meto A., Halilaj G. The Integration of Cone Beam Computed Tomography, Artificial Intelligence, Augmented Reality, and Virtual Reality in Dental Diagnostics, Surgical Planning, and Education: A Narrative Review. Applied Sciences. 2025;15(11):6308. https://doi.org/10.3390/app15116308

11. Alghauli M.A., Aljohani W., Almutairi S., Aljohani R., Alqutaibi A.Y. Advancements in digital data acquisition and CAD technology in Dentistry: Innovation, clinical Impact, and promising integration of artificial intelligence. Clinical eHealth. 2023;8:32-52. https://doi.org/10.1016/j.ceh.2025.03.001

12. Босяков С.М., Доста А.Н., Винокурова А.В. Конечно-элементный анализ влияния конструкции ортодонтического аппарата на расширение верхней челюсти. Известия Саратовского университета. Новая серия. Серия: Математика. Механика. Информатика. 2013;13(4-1):42–52. [Bosiakov S.M., Dosta A.N., Vinokurova A.V. Finite element analysis of the influence of the orthodontic appliance design on the maxillary expansion. Izvestiya of Saratov University. Mathematics. Mechanics. Informatics. 2013;13(4-1):42–52. (In Russ.)]. https://doi.org/10.18500/1816-9791-2013-13-4-42-52

13. Kawamura J., Tamaya N. A finite element analysis of the effects of archwire size on orthodontic tooth movement in extraction space closure with miniscrew sliding mechanics. Progress in orthodontics. 2019;20(1):3. https://doi.org/10.1186/s40510-018-0255-8

14. Chen J., Zhu D., Zhao M., Cheng Z., Pan Y., Liu X. Three-dimensional finite element analysis of the optimal mechanical design for maximum inward movement of the anterior teeth with clear aligners. Scientific reports. 2024;14(1):13203. https://doi.org/10.1038/s41598-024-63907-x

15. Xue J., Ye N., Yang X., Wang S., Wang J., Wang Y. et al. Finite element analysis of rapid canine retraction through reducing resistance and distraction. Journal of applied oral science. 2014;22(1):52-60. https://doi.org/10.1590/1678-775720130365

16. Singh J.R., Kambalyal P., Jain M., Khandelwal P. Revolution in Orthodontics: Finite element analysis. Journal of International Society of Preventive. 2016;6(2):110-114. https://doi.org/10.4103/2231-0762.178743

17. Anh T.N., Hamanaka R., Jinnai S., Komaki H., Yamaoka S., Tominaga J.Y. et al. Simulation of orthodontic tooth movement during activation of an innovative design of closing loop using the finite element method. American journal of orthodontics and dentofacial orthopedic. 2021;160(2):240-249. https://doi.org/10.1016/j.ajodo.2020.04.026

18. Gao H., Luo L., Liu J. Three-dimensional finite element analysis of maxillary molar distalization treated with clear aligners combined with different traction methods. Progress in orthodontics. 2024;25(1):47. https://doi.org/10.1186/s40510-024-00546-y

19. Гордеева Е.Г. Разработка моделей и алгоритмов управления процессами диагностики и лечения ортодонтических патологий на основе многоальтернативного и имитационного подхода: автореферат диссертации на соискание ученой степени кандидата медицинских наук. Воронеж; 2014. 149 с. [Gordeeva E.G. Development of models and algorithms for managing the processes of diagnosis and treatment of orthodontic pathologies based on a multi-alternative and simulation approach: abstract of a dissertation for the degree of candidate of medical sciences. Voronezh; 2014. 149 p. (In Russ.)]. https://viewer.rsl.ru/ru/rsl01005552245?page=1&rotate=0&theme=white

20. Доменюк Д.А., Давыдов Б.Н., Дмитриенко С.В., Будайчиев Г.М., Иванюта С.О. Сравнительная оценка популяционных биометрических методов диагностики зубочелюстных аномалий у людей с различными гнатическими, дентальными типами лица и зубных дуг. Медицинский алфавит. 2018;1(2):29-37. [Domenyuk D.A., Davydov B.N., Dmitrienko S.V., Budaichiev G.M., Ivanyuta S.O. Comparative assessment of population-based biometric methods for diagnosing dental anomalies in people with various gnatic, dental types of the face and dental arches. The medical alphabet. 2018;1(2):29-37. (In Russ.)]. eLIBRARY ID: 35040302

21. Lahoud P., Faghihian H., Richert R., Jacobs R., EzEldeen M. Finite element models: A road to in-silico modeling in the age of personalized dentistry. Journal of Dentistry. 2024;150:105348. https://doi.org/10.1016/j.jdent.2024.105348

22. Verma D.R., Shrivastava T., Shukla C., Ali S.A., Dixit S., Patel A. Revolutionizing orthodontics with finite Element method. International Journal of Medical and Pharmaceutical Research. 2025;6(2):41-50. https://doi.org/10.4103/2231-0762.178743

23. Luchian I., Martu M-A., Tatarciuc M., Scutariu M.M., Ioanid N., Pasarin L. et al. Using FEM to Assess the Effect of Orthodontic Forces on Affected Periodontium. Applied Sciences. 2021; 11(16):7183. https://doi.org/10.3390/app11167183

24. Dorado S., Arias A., Jimenez-Octavio J.R. Biomechanical Modelling for Tooth Survival Studies: Mechanical Properties, Loads and Boundary Conditions-A Narrative Review. Materials (Basel). 2022;15(21):7852. https://doi.org/10.3390/ma15217852

25. Singh S., Saha S.G. Biomimetic Dentistry: Restoring Teeth, the Nature's Way. Journal of conservative dentistry and endodontics. 2025;28(10):955-956. https://doi.org/10.4103/JCDE.JCDE_740_25

26. Chen J., Zhu D., Zhao M., Cheng Z., Pan Y., Liu X. Three-dimensional finite element analysis of the optimal mechanical design for maximum inward movement of the anterior teeth with clear aligners. Scientific reports. 2024;14(1):13203. https://doi.org/10.1038/s41598-024-63907-x

27. Bunta O., Festila D., Muresan V., Coloși T., Stan O.P., Unguresan M.L. et al. Mathematical Modeling and Digital Simulation of Teeth Dynamics for the Approximation of Orthodontic Treatment Duration. Applied Sciences. 2023;13(10):5932. https://doi.org/10.3390/app13105932

28. Aruanno B., Barone S., Bordegoni M., Razionale A.V. Knowledge-Based Mathematical Model to Design Personalized Orthodontic Treatments. In: Di Stefano P., Gherardini F., Nigrelli V., Rizzi C., Sequenzia G., Tumino D. eds. Design Tools and Methods in Industrial Engineering IV. ADM 2024. Lecture Notes in Mechanical Engineering. Cham: Springer; 2025. Pp. 448–457. https://doi.org/10.1007/978-3-031-76594-0_51

29. Su Y., Zhang J., Ma H., Zheng X. A novel method to define personalized post-orthodontic treatment dental arch form. BMC Oral Health. 2025;25(1):1587. https://doi.org/10.1186/s12903-025-06993-1

30. Olawade D.B., Leena N., Egbon E., Rai J., Mohammed A.P.E.K., Oladapo B. I. et al. AI-Driven Advancements in Orthodontics for Precision and Patient Outcomes. Dentistry Journal. 2025;13(5):198. https://doi.org/10.3390/dj13050198

31. Tarraf N.E., Ali D.M. Present and the future of digital orthodontics. Seminars in Orthodontics. 2018;24(4). https://doi.org/10.1053/j.sodo.2018.10.002

32. Merema B.B.J., Kraeima J., Glas H.H., Spijkervet F.K.L., Witjes M.J.H. Patient-specific finite element models of the human mandible: Lack of consensus on current set-ups. Oral diseases. 2021;27(1):42-51. https://doi.org/10.1111/odi.13381

33. Wang Q., Jiang Z., Xue Z., et al. Application of Mathematical Model in Orthodontics. Mobile Information Systems. 2022. Vol. 2022, Article ID 5286225. P. 1-12. doi:https://doi.org/10.1155/2022/5286225

34. Zhang Z., Li C., Zheng Q., Shi B., Liu R. Finite element analysis of maxillary orthodontic therapies with variable alveolar bone grafts under occlusal forces in patient with unilateral cleft lip and palate. Frontiers in bioengineering and biotechnology. 2024;12:1448286. https://doi.org/10.3389/fbioe.2024.1448286